|
Celeris®
Laboratory Airflow
Control System
 Celeris
is a microprocessor-based airflow control system for research
laboratories and other critical room environments. Providing
effective integration--and all the benefits of Usage Based
Controls™--the system can meet an array of information
needs, from the simplest to the most complex. Celeris'
information technology generates a variety of reports,
converting data into useful information to enhance your
system's performance.
Celeris
provides:
- Cost-effective
integration
- BACnet™
interface
- The
ability to monitor, change and exchange data from a
central location
- Pressurization
control
- Space
comfort control
- Temperature
control
- Humidity
control
- Occupancy
control
- Remote
diagnostics
- Comprehensive
reporting and trending through the BMS
Interoperability.
The Celeris system provides a BACnet interface for seamless,
bi-directional communication with the Building Management
System. All data values, alarms, and set points used in
the room-level control scheme are available to the BMS.
The Celeris system complies with the BACnet 135-2001 standard
as an Application Specific Controller (B-ASC).
Single
source responsibility in the laboratory space. Celeris
offers single-source control capabilities in laboratory
spaces and other critical environments. The system airflow
controller handles both airflow and temperature control,
thus eliminating the need for multiple controllers in
a space, and reducing cost and coordination efforts.
Platform to grow and expand. Celeris' architecture
allows you to easily reconfigure your system as your facility
needs change. The system's platform will enable you to
add new software applications as they become available.
Complete
Environmental Control
A new control platform that leverages LonWorks™ technology
and the Phoenix Accel II® venturi valve,
to provide the complete solution for control of critical
environments.
The Celeris 2 LonWorks based valve controller (LVC), utilizes
a distributed control architecture to perform all critical
room control functions:
- Pressurization
control
- Temperature
control
- Humidity
control
- Occupancy
mode control
- Emergency
mode control
The
Celeris 2 LVC offers the power and flexibility of a conventional
room control system but in a more stream-lined and cost-effective
manner. Targeted at Cleanrooms, Vivariums and their support
spaces, Celeris 2 can operate as either a stand-alone
or fully integrated control system.
Click
here to order more information on the Celeris System.
Download
the Celeris System Literature sheet
View
product data sheet
|
This
monitor uses an industrial grade differential pressure
transducer to directly measure room pressure. To accommodate
switchable rooms, the room pressure alarm set point can
be remotely switched from a dry contact.
Phoenix
Controls Corporation FHM420 Fume Hood Monitor is a new
slim-line monitor for laboratory fume hoods that is
approximately one fourth the size of the company’s standard
monitor. The monitor mounts on the front frame of any
manufacturer’s fume hood and has a very slim profile,
measuring approximately one inch (24mm) wide and four
and one-half inches high (112 mm). Its design keeps
pace with recent changes in fume hood styling. As one
component of the company’s airflow control system for
fume hoods, this full-function monitor provides laboratory
personnel with continuous operating status information.
During normal states of operation, the monitor will
indicate safe working conditions using a small green
light. Should exhaust airflow levels decrease below
a specified level, both visual and audible alarms will
alert operators to potentially unsafe operating conditions.
Icon's on the face of the monitor can indicate several
states of operation including: